Installing qb701 -b series onto a carrier board, Installing qb701-b series onto a carrier board – DFI QB701-B User Manual

Page 20

Text mode
Original mode

Hardware Installation

Installing QB701-B Series onto a Carrier Board

1. The photo below shows the locations of the mounting holes and the bolts al-

ready fi xed in place.

Important:
The carrier board used in this section is for reference purpose only and
may not resemble your carrier board. These illustrations are mainly to
guide you on how to install QB701-B Series onto the carrier board of
your choice.

2. Grasping QB701-B Series by its edges, insert it into the carrier board, and

you will hear a distinctive¨click¨ indicating QB701-B Series is correctly locked
into position.

Mounting hole

QB701-B Series

Carrier board

Standoff Bolts