DFI CM901-B - Manual (Page 48)

www.dfi .com Chapter 4 BIOS Setup
48
Chapter 4
Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility, AFUDOS.EXE.
Please contact technical support or your sales representative for the files.
To execute the utility, type:
A:> AFUDOS BIOS_File_Name /b /p /n
then press .
C:\AFUDOS>afudos cm9010~1.rom /b /p /n
+--------------------------------------------------------------------------------------------------------+
AMI Firmware Update Utility(APTIO) v2.38
Copyright (C)2011 American Megatrends Inc. All Rights Reserved.
+--------------------------------------------------------------------------------------------------------+
|
| |
|
Reading fi le ..............................
FFS checksums ........................
Erasing fl ash .............................
Writing
fl ash .............................
Verifying fl ash ..........................
Erasing NVRAM ......................
Writing NVRAM ......................
Verifying NVRAM ...................
Erasing BootBlock ....................
Writing BootBlock ....................
Verifying BootBlock .................
C:\AFUDOS>
done
ok
done
done
done
done
done
done
done
done
done
After finishing BIOS update, please turn off the AC power. Wait about 10 seconds and then
turn on the AC power again.
Save as User Defaults
To save changes done so far as user default, select this field and then press .
A dialog box will appear. Select Yes to save values as user default.
Restore User Defaults
To restore user default to all the setup options, select this field and then press
. A dialog box will appear. Select Yes to restore user default.
Launches EFI shell from filesystem device
Attempts to launch EFI Shell application (Shellx64. efi) from one of the available
filesystem devices.