Power management setup, Bios setup – DFI ML905-B11C/B16C User Manual
Page 47

47
3
BIOS Setup
Power Management Setup
The Power Management Setup allows you to configure your system to most ef-
fectively save energy.
AC Auto Power On
Enable this field if you want the system to automatically power-on whenever AC
power comes in.
Watch Dog Timer (Secs)
This field is used to select the time interval of the Watchdog timer. If the system
hangs or fails to function, it will reset at the set time interval so that your sys-
tem will continue to operate.
Wake Up Event
Set this field to Enabled to wake up the system via the onboard LAN, external
modem or a card that uses the PCI PME (Power Management Event) signal to
remotely wake up the system.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level
↑↓→←
: Move
Enter: Select
F1: General Help
+/-/PU/PD: Value
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
AC Auto Power On
Watch Dog Timer (Sec)
Wake Up Event
[Disabled]
[0]
[Disabled]
The settings on the screen are for reference only. Your version may not be identical to
this one.