DFI ML905-B11C/B16C - Manual (Page 39)

39
3
BIOS Setup
Virus Warning
This field protects the boot sector and partition table of your hard disk drive.
When this field is enabled, the Award BIOS will monitor the boot sector and par-
tition table of the hard disk drive. If an attempt is made to write to the boot sec-
tor or partition table of the hard disk drive, the BIOS will halt the system and an
error message will appear.
After seeing the error message, if necessary, you will be able to run an anti-virus
program to locate and remove the problem before any damage is done. Many
disk diagnostic programs which attempt to access the boot sector table will cause
the warning message to appear. If you are running such a program, we recom-
mend that you first disable this field.
CPU L1 and L2 Cache
This field is used to speed up the memory access. Enable the external cache for
better performance.
Hyper-Threading Technology
Enable this field for Windows XP and Linux which are optimized for Hyper-Thread-
ing technology. Select disabled for other OSes not optimized for Hyper-Threading
technology. When disabled, only one thread per enabled core is enabled
Hard Disk Boot Priority
This field is used to select the boot sequence of the hard drives. Move the cursor
to this field then press . Use the Up or Down arrow keys to select a de-
vice then press <+> to move it up or <-> to move it down the list.
Phoenix - AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
Item Help
Menu Level

Use < ↑ > or < ↓ > to select
a device, then press <+>
to move it up, or <-> to
move it down the list.
Press to exit this
menu.
↑↓ : Move PU/PD/+/-: Change Priority F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
1. Ch2 M. : ST3250318AS
2. Bootable Add-in Cards
The settings on the screen are for reference only. Your version may not be identical to
this one.