DFI HR908-B - Manual (Page 38)

www.dfi .com Chapter 4 BIOS Setup
38
Chapter 4
LCD Panel Type
Select LCD panel used by Internal Graphics Device by selecting the appropri-
ate setup item.
LCD Control
Enabled PEG
To enable or disable the PEG .
NB PCIe Configuration
Confi gure PEG0
B0:D1:F0 Gen1-Gen3.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
NB PCIe Confi guration
PEG0
PEG0 - Gen X
Enable PEG
Not Present
[Gen1]
[Auto]
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
Select the Video Device
which will be activated
during POST. This has no
effect if external graphics
present.
Secondary boot display
selection will appear based
on your selection.
VGA modes will be sup-
ported only on primary
display.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
LCD Control
Primary IGFX Boot Display
LCD Panel Type
[VBIOS Default]
[VBIOS Default]
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit