DFI DS910-CD Installation Guide - Manual (Page 3)

3
Installing a SATA drive
1. Remove the 4 mounting screws that se-
cure the HDD brackets to the drive bay.
Mounting screw
2. Align the mounting holes of the SATA drive with the mounting holes on the HDD bracket
and then use the provided mounting screws to secure the drive in place.
HDD bracket
SATA drive
Mounting screw
Mounting screw
3. Place the SATA drive (with HDD bracket)
into the chassis.
Replace the 4 mounting screws you re-
moved in step 1.
4. Connect the SATA data cable and SATA power cable to the connectors on the SATA
drive.
Mounting
screw
SATA data cable
SATA power/data
connector
SATA power cable
SATA power/
data connector
SATA data
connector
SATA power
connector