DFI EC800-CD - Manual (Page 4)

4
Board Layout and Jumper Settings
DDR3
1 1
Intel Atom
D2550/ N2800/
N2600
Intel
NM10
Fintek
F81866
VGA
Buzzer
Standby_LED
3
1
LAN 1
LAN 2
USB 1
USB 3
System fan
Battery
DDR3 DDR3 DDR3
10
1 3
3
10
1
VGA
/
DVI-I
HDD_LED
DVI-I/VGA
COM 1
2 1
20
DIO
USB 4-5
10
1 2
USB 0
USB 2
Line-out
COM 2/ DIO Select (JP10)
12
COM 2/ DIO Select (JP9)
USB 0-3/ 4-5
Power Select (JP8)
5
6
1
2
12
Intel
WG82574L
Intel
WG82574L
19
SIM Card slot
Mic-in
Reset
Power
DC-IN
1
DDR3 DDR3
Mini PCIe 2
Realtek
ALC886
DDR3 DDR3
ICS
9VRS4339
Asmedia
ASM1442
Intersil
ISL95831
Mini PCIe 1 mSATA
SPI Flash BIOS
CFast
Power-on/ CMOS
Select (JP5)
2
5 6
1 Chassis Intrusion
COM 2/ Isolated 4-bit DIO
HDMI
TOP BOTTOM
Power-on/ Clear CMOS Select JP5
Power-on via power button (default) 1-3 On
Auto power-on 3-5 On
Normal (default) 2-4 On
Clear CMOS 4-6 On
COM2/ DIO Select JP9 and JP10
COM2 (default) 1-4-7-10 On
2-5-8-11 On
DIO 2-5-8-11 On
3-6-9-12 On
USB Power Select (JP8) USB 0-1 USB 2-5
+5V 2-4 On 1-3 On
+5V_standby (default) 4-6 On 3-5 On
Note:
You cannot use COM2 and DIO at the same time. Please set up JP9 and JP10 at the same time.
934-EC8000-0B0G
A26054441
Note:
The CD that came with the system contains an autorun screen to install drivers, utilities,
and software applications required to enhance the performance of the system and a user's
manual for your reference. Insert the CD into a CD-ROM drive. The autorun screen will
appear. If after inserting the CD, “Autorun” did not automatically start, please go directly to
the root directory of the CD and double-click “Setup”. Please install all required drivers.