DFI EC800-CD - Manual (Page 3)

3
Installing a Mini PCIe and/or mSATA Card
1. Locate the Mini PCIe slot on the system
board.
2. The system board is equipped with 2 Mini
PCIe slots. The Mini PCIe slot supports full
length and half length Mini PCIe card. Note
the key on the slot. The key ensures the
Mini PCIe card can be plugged into the slot
in only one direction.
Half length
Full length
PCIe x1, USB,
3G signal
PCIe x1, USB,
Wi-Fi signal
3. Grasping the Mini PCIe card by its
edges, align the card into the slot at an
approximately 30 degrees angle. Apply
fi rm even pressure to each end of the card
until it slips down into the slot. The contact
fi ngers on the edge of the card will almost
completely disappear inside the slot.
PCIe x1, USB, and 3G
signals
4. Push the Mini PCIe card down and use the
provided mounting screws to secure the
card on the system board.
Mounting Screw
PCIe x1, USB, and
Wi-Fi signals