Dexaplan VT 623 - Manual (Page 22)

GB / IE - 24
Position 1: 2x “Ding-Dong”
Position 2: short melody
Position 3: longer melody “For Elise”
The unit is maintenance-free.
Regularly check the technical safety and functioning
Use a dry cloth for cleaning the surfaces. For stubborn dirt, clean the
surfaces with a soft, fluff-free, slightly moist cloth without cleaning
additives.
Carefully clean the slits of the loudspeaker [19 and 34] with a dry
brush.
Do not simply throw away packaging material and worn-out
equipment but send it for recycling. Please ask your local authority
for details of your recycling centre or nearest collection point.
This product is warranted for 3 years from the date of purchase. Keep the
till receipt in a safe place as proof of purchase. Contact the service office in
your country in the event of a warranty claim. This warranty is only valid
for the original purchaser and cannot be transferred. The warranty only
covers material or manufacturing defects. It does not cover wear or
damage to fragile parts. The product is only intended for private use and
not for commercial use. The warranty is void in the case of misuse and/or
improper handling, application of force and for any unauthorized repairs.
This warranty does not affect your legal rights.
Information about dealing with problems is available at
www.dexaplan.com. Contact our service centre by email
([email protected]) or by telephone (
0870 / 241 3029
Mon Fri 08:30 17:00 / 1890 851 851 Mon Fri 08:30 17:00)
for any questions. You can obtain all the necessary information about
service issues, such as returning a defective product etc.
Dexaplan GmbH
Paul-Böhringer-Str. 3
D - 74229 Oedheim
12/10/2007
Ident-No.: 12-10-2007-VT 623-ITESGBDE-L75
Maintenance + cleaning
Disposal
Warranty
Service
!
!
!
!
Switching the monitor on and off
Adjusting the monitor image
Adjusting the volume of the indoor station ring tone
Selecting chime melody
!
!
!
!
!
!
!
!
!
!
Press the monitor button [38] in order to see the camera image.
The camera image is displayed on the monitor and the operating
status LED [35] lights red.
The monitor image disappears when the monitor button is pressed
again or automatically after approx. 60 seconds and the operating
status LED lights green again.
The adjustments can only be made when the monitor image is activated
Press the monitor button [38].
Press the image adjustment button [42] once; the settings menu
is displayed on the monitor.
You reach the respective next menu item by repeated pressing of the
image adjustment button (the current menu item is pink) or the
settings menu disappears after the last menu item. The corresponding
setting value is displayed numerically and graphically as a bar.
You can change the setting value of the respective menu item by
pressing the buttons
[41] and [40].
BRIGHTNESS: Brightness (0 to 100)
CONTRAST: Contrast (0 to 100)
SHARPNESS: Sharpness (0 to 6)
COLOUR: Colour saturation (0 to 100)
HUE: Hue (0 to 100); not active for PAL setting
VIDEO: NTSC or PAL (set to PAL)
The settings menu disappears automatically after approx.10 seconds if no
action is taken in the menu, however at the latest after approx. 60 seconds
when the monitor image disappears.
In order to have sufficient time for the adjustment, press the talk button
[36] after switching on the monitor as the monitor image then
remains switched on for approx. 4 minutes.
In order to have a quieter chime, set the volume switch [44] to
“-“; set it to “+* for the louder chime.
Switch on the monitor using the monitor button [38].
Press the volume button [41] to increase the volume of the
chime and the conversation; to reduce the volume, press the volume
button
[40] (settings value will be displayed on the monitor:
can be set between 0 and 100).
You can select one of three melodies using the chime switch [43].
Set the chime switch to one of the three positions:
Settings
Tip:
In 2 steps
Continously adjustable
GB
IE
+
+
1/2/3