Dixon Black Bear - Manual (Page 45)

CARE AND MAINTENANCE
45
MOWER DECK LEVELING PROCEDURE
(continued):
D. Turn both outer blades to align with the deck in front-
to-rear manner. Reposition rear mounting bolts up
or down until rear of mower deck is positioned level
to 1/8” higher in the rear than the side-to-side
measurement.
E. Confirm measurements once again. Blade tips
should be level in a side-to-side manner. In the rear,
blade tips should be level to 1/8" higher than side-
to-side measurement. In the front, blade tips should
be level to 1/8" lower than side-to-side
measurement.
NOTE: This will place the mower deck in a base
measurement position. Additional adjustment may
be required to achieve desired cut for the type of
grass or conditions being mowed.