Dixon Black Bear - Manual (Page 20)

CONTROLS
20
PARKING BRAKE:
The parking brake is designed to hold
the mower from moving and is not
intended for use in stopping the mower
while it is in motion. The engine will
stop if the parking brake is engaged
while the control levers are in the drive
position.
Engage parking brake
before starting engine.
TO SET PARKING BRAKE:
The hand operated parking brake is located
on the left hand side of the mower.
•To engage brake, pull lever up (to the rear).
•To release brake, move lever forward (down).
Note: Always set parking brake before dismounting.
Release parking brake before moving mower.
CAUTION