Devolo dsl+ 1100 LAN - Manual (Page 12)

Connection and installation
|
|
devolo dsl+ 1100 LAN
|
12
2.2.2 Connecting to a network using dLAN adapters
ቢ Remove the rear panel of the device.
ባ Use the included AC adapter to connect the dsl
+
1100 LAN to a power out-
let.
ቤ Use the included gray DSL cable to connect the 'DSL' port of the device to
your Internet provider's DSL line.
ብ Use the included yellow network cable to connect the 'ETH' port of your dsl +
1100 LAN to the network port of your dLAN adapter. The 'ETH' LED on the
device should now be lit.
ቦ Connect another dLAN adapter to your computer. Boot the connected com-
puter.
ቧ Naturally, you can connect multiple computers via your dLAN. Please note
that only one computer at a time can access the Internet, however.
For simultaneous Internet access, multiple computers must be connected via a
LAN router (see 'Connecting to a network using a LAN router').