Devolo dLAN 200 AV USB extender - Manual (Page 20)

dLAN network 19
devolo dLAN 200 AV USB extender
The factory default password is
HomePlugAV
. Assigning a specific
password to a single adapter will
exclude it from the remaining dLAN
network.
If dLAN Cockpit is called up again later after a suc-
cessful initial installation, for example to integrate a
new adapter into a network, the application remem-
bers the devices that were entered earlier. Enter the
new device as described in the Adding an adapter
section. The current network password is assigned
automatically to the newly added device.
4.2.2 Encrypting a network at the touch
of a button
To encrypt a dLAN 200 AV network, in which all asso-
ciated devices are equipped with an encryption button,
simply press the encryption button that is located on
the device. Pressing this button will encrypt your dLAN
200 AV network with a randomly generated password.
The following section contains exact instructions on
the basis of possible network scenarios: