Devolo dLAN 200 AV USB extender - Manual (Page 15)

14 Initial use
devolo dLAN 200 AV USB extender
If not already detected by your operat-
ing system, install the relevant driver
for your USB device in accordance with
the respective manufacturer's instruc-
tions
.
ቤ After you have successfully installed the complete
software, continue by installing the
dLAN 200 AV USB extender hardware. (see 3.5
Connecting the dLAN 200 AV USB extender)
3.5 Connecting the
dLAN 200 AV USB extender
This section describes how to connect your
dLAN 200 AV USB extender to a USB device in your
dLAN 200 AV network.
The dLAN 200 AV USB extender is in-
tended for connection to devices such
as (multifunctional) printers or hard
drives. The adapter only ever supports
one
USB device.
ቢ Connect the dLAN 200 AV USB extender to the
USB device to be connected within your dLAN 200
AV network using a USB cable at the USB port.
ባ Plug the dLAN 200 AV USB extender into an
available power outlet.
When connecting an external USB hard
drive, delayed hardware detection may
occur depending on the manufacturer,
due to the automatic hard drive test.
This may take a few minutes.
ቤ Once you have connected a
dLAN 200 AV USB extender and another devolo
dLAN 200 AV adapter, your dLAN 200 AV net-
work has been set up.
You can find information on the respective
devolo dLAN 200 AV adapter on our website
www.devolo.com .
In chapter 4 dLAN network you can find out
ć how to protect your dLAN 200 AV net-
work individually and
ć how to control access to the USB devices
connected via the
dLAN 200 AV USB extender.