Delta Dore TYWATT 30 - Manual (Page 2)

Select the type of consumption you wish to consult by pressing
button C1/C2:
C1: Cumulated total since first startup (non erasable)
C2: Total since last reset
View the consumption of all subscribed price option periods by
pressing SELEC.
Displays the maximum mean power reached, at end of reading
(before returning to the current display). 3
2
1
PRINCIPLE
On
Flashing
Off No power supply
Normal
operation
LED
status
with
electromechanical
meter
DELTA DORE
Bonnemain - 35270 COMBOURG - France
E-mail : [email protected]
Device compliant with the requirements of directives 2004/108/CE (Electromagnetic Compatibility)
and 2006/95/CE (Low-Voltage Safety).
Because of changes in standards and equipment, the characteristics given in the text and the illustrations of this document are not binding unless confirmed by Delta Dore.
4. How to read your consumption indicators ?
5. Meter indicator light
If you have contracted the Off-Peak option.
E.g. Consultation of C2 total.
Current price period:
Peak Hours
Resetting the Total Consumption Indicators to Zero (C2 only)
Press button RESET C2 for approximately 10 seconds to reset all total consumption indicators to zero, as well as maximum
mean power.
Press SELEC. to check.
Maximum Mean Power Reached
Every 6 minutes, the TYWATT 30 measures the maximum mean power reached. If the measured value does not exceed the
maximum value displayed during a 6-minute acquisition period, the TYWATT 30 will continue to display the previous value.
HP = Peak hour
HC = Off peak hour
6. Technical characteristics
• 230 V, 50 Hz power supply, ±10%
• Insulation class II, with functional earth
• Power consumption: 0.5 VA
• 1 off-peak hours contact input, 230 V
• 1 single-phase remote information bus input for electronic
meter
• 1 CT input, current measurement by external current
transformer (internal Ø: 10 mm max.)
• Rated operating current: 2 to 90 A , Cos ϕ = from 0.8 to 1
• Storage temperature: -10°C to +70°C
• Operating temperature: 0 to +40°C
• Digital display
• Modular unit: 3 modules, h = 53 mm, mounted on DIN rail
• Installation in an environment with normal pollution levels
approximately
6 minutes
approximately
6 minutes
Instantaneous
power (in W)
Instantaneous
power (in W)
C1/C2
C2 C2 C2 C2
RESET C2 C1/C2
C2 C2 C2 C2
5300 Watts 6230 Watts
t t
Press to display
the C2 total
Press to display
the C2 total
Total Peak
Hour consumption
Total Peak
Hour consumption
Reset total
indicators
to zero
The Off-Peak hour
total is at zero
(As many times
as necessary)
Back to the current
price period display
Total Off-Peak
hour consumption
Maximum mean
power reached
(in Watts)
Back to initial
display
Example :
Mean power Mean power