Daktronics CH-1024H - Manual (Page 5)

Section 1: Introduction
1.1
How to Use This Manual
This manual is designed to explain installation and maintenance of the CHTS-1024H display
system. Details for display maintenance are also given. Setup of other control equipment or
operation of the CHTS-300 timing console are not covered in this manual. For questions
regarding the safety, installation, operation or service of this system, please refer to the
telephone numbers listed on the cover page of this manual.
ΚImportant Safeguards:
1. Read and understand these instructions before installing.
2. Do not drop the control console or allow it to get wet.
3. Be sure the display is properly grounded with a ground rod at the display location.
4. Disconnect power to the display when it is not in use.
5. Disconnect power when servicing the display.
6. Do not modify the display structure or attach any panels or coverings to the
scoreboard without the express written consent of Daktronics, Inc.
The box below illustrates Daktronics drawing numbering system. The drawing number
Α7087-P08A-69945≅ is how Daktronics identifies individual drawings. This number is
located in the bottom right corner of the drawing. The manual refers to drawings by the last
set of digits and the letter preceding them. In the example, the drawing would be referred to
as Drawing A-69945. All reference drawings are inserted at the end of the first section which
references them.
1.2 Display
Overview
Reference Drawing: Display, CH-1024H ..................................... Drawing A-46433
Drawing A-46433 shows a Daktronics CH-1024H display. When used with the Daktronics
CHTS-300 timing console, the Daktronics CH-1024H display will show the lap number or lap
time and the first three car positions on the display.
Introduction 1-1