Daktronics DF-4000 - Manual (Page 33)

Gas Price 5-7
Rate Display Startup
To operate the DataMaster Rate displays, the DataMaster 100 must first be
programmed to the rate display function. Use the <
CLEAR/SET FUNCTION > key on
startup. The following text will be displayed on the LCD during startup.
Daktronics, Inc.
Brookings, SD
DataMaster 100
ED-13374 VX.X
The controller will then list the “Current Function”, if it is Rate Display you can
continue, otherwise at the next frame: “Current Function? Press Set Function” you
need to press <
CLEAR/SET FUNCTION > and use the < ↑↓ > to select Rate Display.
Note: Press the <
CLEAR/SET FUNCTION > key quickly to enter the function mode. If
you miss this step, unplug the power to the DataMaster controller and start
again.
Use the following table as a guide to startup procedures.