Daktronics Fuelight FL-2109 Series Petroleum Price Displays - Manual (Page 19)

Control Options 13
Petroleum Price Display Startup
To operate the Fuelight ™ Petroleum Price displays, the transmitter must first be programmed
to the gas price function. Use the key on startup. Use the following table
as a guide to startup procedure.
LCD Screen Action
Press Ent to select a
new code
Press , and then to select
a new price display function. Press to
resume a new function. Use the <
↑↓> arrow
keys to select the new price function; then press
.
SELECT FUNCTION
GAS PRICE
↓↑
Press the arrow up or down keys <
↑↓> until the
gas price option is shown. Press the
key to accept.
The hand-held transmitter should now be ready for use. The transmitter will “remember” the
last function setting, so this step should only need to be done with a new transmitter or one
that is configured for different displays.
Petroleum Price Transmitter Operation
The transmitter LCD display will default to showing the current display settings on power
up. The following text will be shown on the LCD.
LCD Screen Action
LINE PRICE
1
↓ $1.23 9/10
TO MODIFY
1
↓ $1.23 9/10
The display will toggle between these two
screens.
Press the up or down arrow keys <
↑↓> to scroll
through the current setting for any of the lines
on the display.
Press the key to modify any of
the line settings.