beautypg.com

Daktronics Scoreboard Trumpet Horn User Manual

Page 12

background image

6

24 VDC Trumpet Horn Installation (LED Solar Power Option Only)

2. Thread the two wires from the horn through the knockout (or

3

/

8

" hole) in the

scoreboard access panel.

3. Place horn/angle bracket assembly over the knockout/hole and

7

/

32

" holes in the

front panel of the scoreboard and attach using #10 hardware provided.

4. Install the horn harness as shown in Drawing A-321327.
5. Make wiring connections between the horn and the existing scoreboard driver per

Drawing C-315892 Electrical Installation Details.

6. Close and secure the horn entrance panel.
7. To test the horn, power on the scoreboard and control console, and press HORN.

See also other documents in the category Daktronics Monitors: