Cybex 14220 VR3 Total Access Cable Column - Manual (Page 13)

Cybex Owner’s Manual
13
Install weight plate decals
1. Peel off backing from either the pounds side or kilograms side of front sheet, making sure
that the decals remain attached to the front sheet.
Backing
Front sheet
Weight
decals
2. Place decals on front sheet in the correct position on weight plates.
3. Insert a guide pin through each hole of the template. (A guide pin can be anything that fits
through the weight stack hole, such as a weight stack selector pin.)
4. Align decal and rub it onto weight plates.
5. Remove front side, leaving decals adhering to weight plates.
190
210
310
290
270
250
230
330
350
370
410
390
30
50
150
130
110
90
70
170
Guide Rod
Weight Stack
Pounds
or
Kilograms
Verify proper operation