Cybex 13030-999 VR1 Row User Manual
Page 12

Cybex Owner’s Manual
12
If
Then
If machine needs
weight stacks
removed before
moving to desired
location.
5. Remove guide rod cap and springs.
6. Repeat procedure for opposite guide rods.
7. Remove spiral pin securing cable end to top weight using a 3/16”
pin punch and hammer.
Cable End
Top Weight
Spiral
Pin
8. Remove lifting post.
9. Remove weight plates
10. Move machine to desired position.
11. Remove the four shipping cones using a 3/4” socket or wrench.
12. Attach foot pads to each foot of frame.
Securely anchor machine to the floor
Cybex strongly recommends to maximize stability, equipment must be secured to a solid level
surface.
WARNING: Anchoring equipment:
•
Cybex is not responsible for the actual anchoring of equipment. Consult with a
professional contractor.
•
Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or
better).
•
If legs/frame does not contact surface, DO NOT pull down with anchors. Shim
any leg or frame not in contact with surface using flat washers.
Install weight plates
1. Install individual weight plates one at at time.
- CX-445T (67 pages)
- 362A Arc Trainer (48 pages)
- 362A Arc Trainer (44 pages)
- 425A Arc Trainer (64 pages)
- 525T Treadmill (80 pages)
- 525AT Arc Trainer (74 pages)
- 627A Arc Trainer (94 pages)
- 772A Arc Trainer (96 pages)
- 625A Arc Trainer (94 pages)
- 750AT Arc Trainer (78 pages)
- 16210 Plate Loaded Seated Calf (28 pages)
- 16210 Plate Loaded Seated Calf (20 pages)
- 16600 Free Weight Circuit Step (18 pages)
- 16200 Plate Loaded Hack Squat (18 pages)
- 16200 Plate Loaded Hack Squat (18 pages)
- 16200 Plate Loaded Hack Squat (26 pages)
- 16200 Plate Loaded Hack Squat (18 pages)
- 16200 Plate Loaded Hack Squat (30 pages)
- 16200 Plate Loaded Hack Squat (18 pages)
- 16200 Plate Loaded Hack Squat (28 pages)
- 16200 Plate Loaded Hack Squat (32 pages)
- 19071 Big Iron Combo Bench (22 pages)
- 19110 Big Iron Benches (18 pages)
- 19300 Big Iron Glute Ham (18 pages)
- 18030 Bravo Lift (28 pages)
- 16310 Plate Loaded Leg Curl (32 pages)
- 8830 Bravo (32 pages)
- 8820 Bravo Bench (18 pages)
- 16210 Plate Loaded Seated Calf (22 pages)
- 16210 Plate Loaded Seated Calf (20 pages)
- 16210 Plate Loaded Seated Calf (20 pages)
- 8821 Bravo Bench (14 pages)
- 8800 Bravo Medical (24 pages)
- 8830 Bravo Medical (24 pages)
- 625R Cycle Bike (80 pages)
- 750R Cycle Bike (58 pages)
- 770R Cycle Bike (76 pages)
- 11190 Eagle Torso (32 pages)
- 11190 Eagle Torso (32 pages)
- 16310 Plate Loaded Leg Curl (32 pages)
- 770R Cycle Cybex GO (68 pages)
- 11020 Eagle Incline Pull (30 pages)
- 11040 Eagle Leg Press (30 pages)
- 20190 Eagle NX Hip Torso (30 pages)
- 20190 Eagle NX Hip Torso (30 pages)