Danby DDW399W - Manual (Page 3)

2
When loading items to be washed:
• Locate sharp items so that they are not likely to
damage the door seal.
• Load sharp knives with the handles up to reduce
the risk of cut-type injuries.
• Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent.
For plastic items not so marked, check the
manufacturer's recommendations.
• Do not touch the heating element during or
immediately after use.
• Do not operate your dishwasher unless all
enclosure panels are properly in place.
• Do not tamper with controls.
• Do not abuse, sit on, or stand on the door or dish-
rack of the dishwasher.
• To reduce the risk of injury, do not allow children to
play in or on a dishwasher.
• Under certain conditions, hydrogen gas may be
produced in a hot-water system that has not been
used for two weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot-water system has not been
used for such a period, before using the
dishwasher turn on all hot-water faucets and let
the water flow from each for several minutes. This
will release any accumulated hydrogen gas. As
hydrogen gas is flammable, do not smoke or use
an open flame during this time.
• Remove the door to the washing compartment
when removing an old dishwasher from service or
discarding it.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
When using your dishwasher, follow basic safety
precautions
• Read all instructions before using the
dishwasher.
• Use the dishwasher only for its intended
function.
• Use only detergents or wetting agents
recommended for use in a dishwasher and
keep them out of the reach of children.
SAVE THESE INSTRUCTIONS
Electrical Instructions:
An electrical supply of 120 volts AC only, 60Hz is
required. For your personal safety, the appliance
must be grounded. This appliance is equipped with
a power supply cord having a 3-prong grounding
plug. To minimize possible shock hazards it must be
plugged into a matching 3-prong grounding type
electrical outlet.
Grounding Instructions:
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least
resistance for electric current. This appliance is
equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is
installed and grounded in accordance with all local
codes and ordinances.
WARNING
Instructions pertaining to a risk of fire, electric
shock, or injury to persons.
3-Prong
grounding
Type
Receptacle
Power
Supply
Cord
3-Prong
Grounding
Plug