beautypg.com

Care and maintenance, Parking brake adjustment – Dixon 13090-0601 User Manual

Page 30

background image

30

With the brake handle in the release position, remove
the cotter pin from the castle nut. Insert a 0.010
feeler gauge between the brake disc and the brake
puck. Tighten the castle nut with the feeler gauge
inserted until the gauge fits snugly between the disc
and puck. The gap should not be so tight that the feeler
gauge cannot be reinserted after removal. Back the
castle nut to the closest pin hole and reinsert the
cotter pin. Repeat for other side. See picture below.

CARE AND MAINTENANCE

PARKING BRAKE ADJUSTMENT

COTTER PIN

0.10 GAP BETWEEN BRAKE DISC AND

CASTLE NUT

This manual is related to the following products: