Dixon 12828-0603 - Manual (Page 36)

36
STEERING CONTROL ADJUSTMENTS (continued):
CARE AND MAINTENANCE
To adjust steering control levers:
1. Loosen the front and rear bolts retaining the bellows
hold down plate and slide the bellows and plate up
the steering lever to expose the steering control
mechanism.
2. Move the levers inboard to the operating position.
3. Loosen the set screw of the clamp collars which lock
the upper arms to the lower arms.
4. Raise or lower the arms for desired height. There is
approximately 3” of height adjustment available.
Upper shaft should have a minimum of 1-1/2”
engagement in lower shaft.
5. Rotate arms until they have the
desired orientation front to back.
6. Tighten the clamp collar set
screws.