Cybex 16150 Plate Loaded Squat Press - Manual (Page 9)

9
Cybex Owner’s Manual
The dimensions stated in the assembly instructions of this manual include the maximum foot print (in
use) dimensions.
• Area is not in the vicinity of high humidity, such as in the vicinity of a steam room, sauna, indoor
pool or outdoors. This unit is designed to function normally in an environment with a relative
humidity range of 30% to 75%.
Exposure to extensive water vapor, chlorine and/or bromine could adversely affect the electronics as
well as other parts of the unit.
• Area maintains an ambient temperature range of 50° F (10° C) to 104° F (40° C) degrees.
Tools Required
• 3/4” Wrench
• 5/16” Allen wrench
Assembly Procedure
Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure to
return, replace, or reorder parts.
Move to desired location
1. Remove foam and shrink wrap securing two weigh tubes, rubber feet, and loctite.
2. Remove each cone shaped shipping support using a 3/4” socket or wrench.
3. Place rubber feet on each foot of the frame.
Install weight tubes
1. Remove the SHCS using a 5/16” Allen wrench.
SHCS
Weight Tube
Hole
Threaded Weight
Tube Hole