Cybex 16110 Plate Loaded Leg Press - Manual (Page 9)

9
Cybex Owner’s Manual
The dimensions stated in the assembly instructions of this manual include the maximum foot print (in
use) dimensions.
• Area is not in the vicinity of high humidity, such as in the vicinity of a steam room, sauna, indoor
pool or outdoors. This unit is designed to function normally in an environment with a relative
humidity range of 30% to 75%.
Exposure to extensive water vapor, chlorine and/or bromine could adversely affect the electronics as
well as other parts of the unit.
• Area maintains an ambient temperature range of 50° F (10° C) to 104° F (40° C) degrees.
Tools Required
• 1/8” Allen Wrench
• 5/16” Allen wrench
• 3/4” Allen wrench
Assembly Procedure
Three people will be required for this procedure.
Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure to
return, replace, or reorder parts.
Verify parts list shown below.
Qty Part Number Description Diagram
6 HN784000 Locknut .375-16
6 JC780420 BHSCS .375-16 X 1.25
6 HS348300 Split Lockwasher .375
Move to desired location
1. Keep all shipping packages near area of installation.
2. Remove foam and shrink wrap securing weight bar and weight tubes.
3. Remove each (standard) cone- shaped shipping support using a 3/4” socket or wrench.
4. Place rubber feet (supplied with machine) on each foot of the frame.