Cybex 16110 Plate Loaded Leg Press User Manual

Page 10

Text mode
Original mode

Cybex Owner’s Manual

Install weight bar

1. Position bar on Leg Press and insert all six Button Head Socket Cap Screws (BHSCS) through

mounting plate.

BHSCS (6)

Weight Bar

2. Place washer and locknut on BHSCS and finger tighten.
3. Position carriage so that the bar is resting on lowest position. Raise and lower carriage. Verify

stop plates on bar are hitting stop blocks at same time at both stop positions.

Stop Plates

Stop Blocks

4. Tighten all six BHSCS.

NOTE: If stop plates are not hitting stop plate at the same time then adjust are before tightening

BHSCS.

NOTE: If bar cannot be adjusted, loosen all bolts underneath carriage and align then tighten.