Cybex 16040 Free Weight Flat Bench - Manual (Page 8)

8
Cybex Owner’s Manual
Assembly
Machine Specifications
Flat Bench - Product No.16040
Weight Machine Dimensions at Rest Machine Dimensions in Use
43 Lbs 43” L x 24” W x 17” H Same
20 Kg 122 cm L x 61 cm W x 43 cm H Same
Maximum User Weight Maximum Training Weight
300 lbs/135kg 800 lbs/362 kg
Choosing and Preparing a Site
Before assembling the unit, verify the chosen site meets the following criteria:
• Area is well lit and well ventilated.
• Surface is structurally sound and properly leveled.
• Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches
(0.6 meters).
•
Adjacent units may share the free area.
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate
clearance around each machine to allow for safe use and passage.
In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least
30 by 48 inches and be served by an accessible route for at least one of each type of exercise
equipment. If the clear space is enclosed on three sides (e.g., by walls or the equipment itself), the
clear space must be 36 by 48 inches.
All other machines must have a clear floor space of 23” for all access point on the machine, unless
shown in the Owner’s Manual.