Cybex 20000 Eagle NX Chest Press - Manual (Page 13)

Cybex Owner’s Manual
13
Separate Frame
1. Remove six bolts and three connectors securing two halves of the frame using a 7/32” Allen
wrench.
1
2
Description
1 Bolt (6)
2 Connector (3)
2. Move each half through the doorway to the desired location.
Assemble Frame
1. Apply #242 Loctite to bolts.
3
2
1
Description
1 Bolt (6)
2 Connector (3)
3 # 242 Loctite
2. Secure two halves of the frame with the six bolts and three connectors, using a 7/32” Allen
wrench.
Install weight plates
1. Lean guide rods slightly outward, away from machine, DO NOT put excessive pressure on
guide rods, it will damage lower guide rod caps.
2. Wipe the entire length of the guide rods with a clean cloth.
3. Lubricate the guide rods with a light coating of medium weight oil.