Cybex 20000 Eagle NX Chest Press - Manual (Page 10)

Cybex Owner’s Manual
10
Verify parts list shown below
Qty Part Number Description Diagram
3 20000-339 Foot Pad
2 20000-376 Foot Pad
3 20000-377 Foot Pad
1 12000-560
Decal, Weight Plate
(30-290)
14 4000C101 Weight Stack Plate
If Eagle machine CAN fit through doorway
Two people will be required for this procedure
1. Move to desired location.
2. Remove the four shipping cones using a 3/4” socket or wrench.
3. Remove bolt from cones with hammer. Recycle cones.
4. Attach foot pads to each foot of frame.
5. If weight stack needs to be installed, follow procedure for installing weight stack and weight
plate decal.
If Eagle machine CANNOT fit through doorway.
Two people will be required for this procedure
1. Remove the four shipping cones using a 3/4” socket or wrench.
2. Remove bolt from cone with hammer. Recycle cone.
Disconnect cable
1. Make a note of the current cable routings and connections.This will assist you in reinstalling
them properly.