Cybex 8800 Bravo - Manual (Page 16)

16
Cybex Owner’s Manual
If Then
8810 cannot fit
through a doorway
1. Remove the four shipping cones using a 3/4” socket or wrench.
2. Place foot pads on each foot of the frame.
3. Remove the four BHSCS securing one of the halves.
BHSCS
BHSCS
4. Move unit to desired location.
5. Reattach the frame halves and securely tighten the four BHSCS.
6. Install Chip-Up Bar. Add Loctite #242 to each BHSCS and threaded
holes. Tighten screws securely and attach insert plugs.
BHSCS
Locknut BHSCS
Chin-Up
Bar
Insert
plug