Cybex 8800 Bravo - Manual (Page 15)

15
Cybex Owner’s Manual
If Then
8800/8810 can fit
through a doorway
Two people will be required for this procedure
1. Move to desired location.
2. Remove the four shipping cones using a 3/4” socket or wrench.
3. Attach foot pads to each foot of frame.
8800 cannot fit
through a doorway
1. Remove the four shipping cones using a 3/4” socket or wrench.
2. Place foot pads on each foot of the frame.
3. Remove Chin-Up Bar.
Chin-Up
Bar
Insert
plug
Insert
plug
BHSCS
Locknut BHSCS
4. Remove the four BHSCS securing one of the halves.
BHSCS
BHSCS
5. Move unit to desired location.
6. Reattach the frame halves and securely tighten the four BHSCS.
7. Reattach Chin-Up Bar. Add Loctite #242 to each BHSCS and threaded
holes. Tighten screws securely. Reattach insert plugs.