Rear panel – Datavideo CP-100 PRO User Manual
Page 9
8
1
Rear Panel
1. Power Switch
To switch the power on and off
2. Main DC Power Cord connecting socket
To connect to the main AC power adaptor
3. Component Video Output
Component Y.U.V. or R.G.B.video signal output.
Although there are multiple outputs you can only use one output at a time. If
you use more than one simultaneously the output signal level will be reduced.
4. External Switch Remote Interface
Connect an external Datavideo Remote Adaptor (RMC-60). Support up to 20-
switches for your own Kiosk interface
7
3
5
2
6
4
External Remote Adaptor
(RMC-60) connected to
CP100 Pro
Connect up to 20 switches
here.