Dymo 360D - Manual (Page 25)

25
Caring for Your Label Maker
Your label maker is designed to give you long and trouble-free service, while
requiring very little maintenance. Clean your label maker from time to time to
keep it working properly. Clean the cutter blade each time you replace the
label cassette.
To clean the cutter blade
1 Remove the label cassette.
2 Press and hold the cutter button
to expose the cutter blade. See
Figure 6.
3 Use a cotton ball and alcohol to
clean both sides of the blade.
To clean the print head
1 Remove the label cassette.
2 Remove the cleaning tool from inside the label compartment cover.
3 Gently wipe the padded side of the tool across the print head.
See Figure 6.
Press and hold
Print head
Figure 6