Cybex 19061 Big Iron Combo Bench - Manual (Page 9)

9
Cybex Owner’s Manual
All other machines must have a clear floor space of 23” for all access point on the machine, unless
shown in the Owner’s Manual.
The dimensions stated in the assembly instructions of this manual include the maximum foot print (in
use) dimensions.
• Area is not in the vicinity of high humidity, such as in the vicinity of a steam room, sauna, indoor
pool or outdoors. This unit is designed to function normally in an environment with a relative
humidity range of 30% to 75%.
Exposure to extensive water vapor, chlorine and/or bromine could adversely affect the electronics as
well as other parts of the unit.
• Area maintains an ambient temperature range of 50° F (10° C) to 104° F (40° C) degrees.
Tools Required
• 9/16” Torque Wrench (in-lb)
• 7/16” Allen wrench
• 9/16” Wrench (2)
• 6’ Step Ladder (minimum)
Assembly Procedure
Three people will be required for this procedure.
Move to desired location
WARNING: Serious injury or death can result if the unit is not removed from the pallet
correctly. Use a minimum of three people when preforming this procedure.
Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure to
return, replace, or reorder parts.
1. Move all shipping packages to desired location.
2. Remove items from pallet in the order shown on the following diagram Carefully handle parts
to prevent damage to paint or frame.