Assembly, Machine specifications, Tools required – Cybex 19061 Big Iron Combo Bench User Manual
Page 8: Assembly procedure

8
Cybex Owner’s Manual
Assembly
Machine Specifications
Total Weight and Size 19061 Combo Rack
Weight
Machine Dimensions at Rest
Machine Dimensions at Use
1065 Lbs
91” W x 111” L x 104.5” H
Same
484 Kg
177 cm W x 281.94 cm L x 265 H
Same
Total Weight and Size 19071 Combo Rack
Weight
Machine Dimensions at Rest
Machine Dimensions at Use
1034 Lbs
91” W x 111” L x 93” H
Same
470 Kg
177 cm W x 281.94 cm L x 236 H
Same
Maximum User Weight
Maximum Training Weight
400lbs/180kg
1000 lbs/453 kg
Choosing and Preparing a Site
Before assembling the unit, verify the chosen site meets the following criteria:
•
Area is well lit and well ventilated.
•
Surface is structurally sound and properly leveled.
•
Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches
(0.6 meters).
•
Adjacent units may share the free area.
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate
clearance around each machine to allow for safe use and passage.
In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least
30 by 48 inches and be served by an accessible route for at least one of each type of exercise
equipment. If the clear space is enclosed on three sides (e.g., by walls or the equipment itself), the
clear space must be 36 by 48 inches.