CREATOR CR-LAN15 - Manual (Page 8)

CREATOR CHINA 2011-09 WWW.CREATOR1997.COM
3 User’s Manual of LAN G15 Programmable Touch Screen
1.5 Installation of Touch Screen
Driver
1.5.1 Touch Screen Driver under
Windows XP
1.Prepare the following objects: touch screen
(complete touch screen, properly install the
battery (not necessary)), 12V power, USB data
cable, touch screen driver (driver is in CR-LAN
G15 Driver folder), as picture 1-1:
Picture 1-1
2. To place the folder into the PC installed with
ThinkDraw software, e.g. C ： \CR-LAN G15
Driver
3. Start touch screen, connect USB cable with
PC, dialogue box of “new hardware
detected “is prompted, as well as “Find
new hardware wizard”, as picture 1-2:
图 1-2
4.Select “install from list or appointed position
(premier)(s)”, click on “Next step” to see
“hardware update wizard” dialogue box, as
picture 1-3:
Picture 1-3
Remove the tick before “Search portable media
(soft disc, CD-ROOM), and then tick “include this
position in searching (0)”, click on “Navigate” to
select a saving path of the driver, click on
“Confirm”, as picture 1-4 and picture 1-5: