beautypg.com

V33h tube guitar amplifier with reverb, Service information – Crate V33H User Manual

Page 12

background image

V33H Tube Guitar Amplifier with Reverb

12

V33H TECHNICAL SPECIFICATIONS

Output Power Rating

33 W rms @ 10% THD, 8 ohm load, 120 VAC

Input Impedance

700 kohms

Signal-to-Noise Ratio

42 dB, Typical (Clean Ch only)

Gain

Overdrive Ch

102 dB, all controls @ 10

Clean Ch

56 dB, all controls @ 10

EQ

Treble: 12 dB range @ 6 kHz

Middle: 10 dB range @ 1 kHz

Bass: 8 dB range @ 150 Hz

Boost

10 dB @ 900 Hz

Presence

8 dB @ 10 kHz

Preamp Tubes

(3) 12AX7

Power Tubes

(4) EL84

Power Requirements

90-132 VAC, 60 Hz, 85 VA

220-240 VAC, 50 Hz, 85 VA

Size (H x W x D)

8.25 in/21.0 cm x 24.25 in/61.6 cm x

9.15 in/23.2 cm

Weight

25.4 lb/11.5 kg

www.crateamps.com

@2007 LOUD Technologies Inc.

16220 Wood-Red Road NE • Woodinville, WA 98072

Part No. 0024537 Rev. B 08/07

Service Information

If you are having a problem with your V33H, you can go to our website (www.crateamps.com)
and click on Support for service information, or call 1-800-898-3211 during business hours
(7 am to 5 pm PST, Monday-Friday). If you are outside of the U.S., contact your local distribu-
tor for technical support and service.

The V33H is covered with a durable fabric-backed vinyl material. Wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.

Crate continually develops new products, as well as improves existing ones. For this reason, the specifications

and information in this manual are subject to change without notice.

“Crate” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or

registered trademarks of their respective holders and are hereby acknowledged.