ConnectGear WA540G - Manual (Page 34)

Wireless LAN Access Point Configuration
33
3.2.7 System Utility
From here, you can define the Access Point’s IP Address and Login Password and
enable the Access Point to be a DHCP Server.
Parameter Description
Current Password Enter the current password (up to 15-digit alphanumeric string) of the
Access Point. The default password for the Access Point is 1234. Note
that the password is case-sensitive.
New Password Enter the password (up to 15-digit alphanumeric string) you want to login
to the Access Point. Note that the password is case-sensitive.
Re-Enter Password Reconfirm the password (up to 15-digit alphanumeric string) you want to
login to the Access Point. Note that the password is case-sensitive.
IP Address Designate the Access Point’s IP Address. This IP Address should be
unique in your network. The default IP Address is 192.168.2.1.
Subnet Mask Specify a Subnet Mask for your LAN segment . The Subnet Mask of the
Access Point is fixed and the value is 255.255.255.0.