ConnectGear WA540G - Manual (Page 28)

Wireless LAN Access Point Configuration
27
3.2.5 MAC Address Filtering
This Access Point provides MAC Address Filtering, which prevents the unauthorized
MAC Addresses from accessing your wireless network.
Parameter Description
Filtering Enable or disable the MAC Address Filtering function.
MAC Address Filtering Table This table records the MAC addresses of wireless stations you want to
allow to access your network. The “Comment” field is the description of
the wireless station associated with the “MAC Address” and is helpful for
you to recognize the wireless station.
Add MAC address into the
table
In the bottom “New” area, fill in the “MAC Address” and “Comment” of the
wireless station to be added and then click “Add”. Then this wireless
station will be added into the “MAC Address Filtering Table” above. If you
find any typo before adding it and want to retype again. Just click “Clear”
and both “MAC Address” and “Comment” fields will be cleared.
Remove MAC address from If you want to remove some MAC address from the “MAC Address