Comtech EF Data NetVue Release 1.1 Provisioning Guide - Manual (Page 14)

MN-NETVUEPVG or CD-NETVUEPVG Revision 1
NetVue Provisioning Guide Release 1.1
12
• Spectrum Analyzer Input: The input port on the spectrum analyzer. If the spectrum analyzer is
single port device (Agilent or Anritsu) no entry is required. If multiport SED Decimator with eight
(8) ports then ports 1 to 8
• Power Distribution Unit Name: The name or IP address of the PDU that enables or disables
power to a device
• Power Distribution Unit Port Number: The assigned port (outlet) number on the PDU
• Redundancy Group Name: The name of the redundancy group. IMPORTANT: Each redundancy
group for each equipment type should have a unique name
• Redundancy Role: The role of each device in a redundancy group. The valid options are:
• Primary
• Backup
• Standalone
11. Enter a Base Long. (Longitude) and Lat. (Latitude) to sync ALL rows that have Local in the Local/Remote
column.
CAUTION
Take care with this option, because it overwrites all existing Longitude and Latitude
information for Local devices.
12. After all the user data has been entered into the NPT, click Build Network to export all of the network data
to a CSV file.
13. If desired, navigate through the NPT to see the Help and Contact information. Click Help or Contact to
see the related pages.