Compuprint 3046 Network Interface Tools - Manual (Page 4)

4
Explication of Function Buttons:
z Scan
Scan on-line printers.
Scan scope: the subnet which this software locates at, and the subnets listed at
Option->Config->Network segments scanned.
z List
Switch to list mode.
In this mode, you can browse all on-line printers’brief information. Thereinto,
MAC address is physical address, Check Sum is firmware file’s check sum.
z View
Switch to view mode.
In this mode, you can only browse a selected printer’s detailed information.
z Manage
Switch to management mode, required to input the current printer’s password.
In this mode, you can browse a selected printer’s detailed information and
modify its configuration. Further more, you can reset its password and get an
upgrade.
*Suggest: to be convenient to manage printers, you had better set the same
password for all printers. In this way, you don’t need to reinput password when
switching among the different printers. Otherwise, when you select another
printer, it will auto switch to view mode.
z Option
Switch to configuration interface.
Here, you can add/delete subnets in which the software scans on-line printers;
enable/disable system tray minimization, set refresh cycle for status.
z Help
Switch to help interface.
z About
Show version and declare the copyright.
z Exit
Exit this software.