Code Single-Bay Battery Charger - Manual (Page 2)

Quickstart Guide
Single Bay Charger
Quickstart Guide
Charging a bar code reader:
The Single Bay Charger features a charging bay
that can accommodate hand-held wireless
configurations of the CR2, CR2500, CR3 and
CR3500, with or without an Elastomer Boot.
(Figure 1)
Figure 2
To charge a reader, simply place the reader,
facing forward, onto the charging post. (Figure 2)
Note: Fully charge batteries before first use.
The approximate charge time is 4 hours.
To begin, plug the power cord into the back of the charger, and plug the adapter into a wall socket.
Wall Mount & 2 Screws to secure
the charger to wall mount.
Included:
Single Bay Charger
Charging a bar code reader:
The Single Bay Charger features a charging bay
that can accommodate hand-held wireless
configurations of the CR2, CR2500, CR3 and
CR3500, with or without an Elastomer Boot.
(Figure 1)
Charger and Power Supply (if ordered)
To charge a reader, simply place the reader,
facing forward, onto the charging post. (Figure 2)
Note: Fully charge batteries before first use.
The approximate charge time is 4 hours.
To begin, plug the power cord into the back of the charger, and plug the adapter into a wall socket.
Wall Mount & 2 Screws to secure
the charger to wall mount.
Included:
Figure 2
Figure 1 Figure 1
Charger and Power Supply (if ordered)