Code CR1200 Eclypsis HIS Quick Start - Manual (Page 3)

C005983_01_Eclypsis_BMA_QuickStartGuide 1
1.0 Introduction
Code Corporation is a market leader in manufacturing and distributing bar code readers for Bar Coded Medication
Administration (BCMA). The physical size, configurability, modular design, reliability, and superior bar code reading performance
of Code readers make them a perfect fit for the bedside environment. The Code Reader 2500 (CR2500), in wireless or cabled
configurations, or the Code Reader 1200 (CR1200) cabled reader can be used in this environment. However, Code Corporation
recommends the use of the wireless CR2500 for convenient operation and to eliminate the possibility of a cable interfering with
patient care.
Through Code’s experience in implementing bar code readers in hospitals, the Bar Coded Medication Administration QuickStart
Guide has been developed to provide users quick and easy instructions to configure Code bar code readers to the preferred
workflow, as outlined in this Guide.
For more information about Code bar code readers, user manuals are available on our website at:
http://www.codecorp.com/manuals.php
To configure a Code bar code reader for a bedside environment, you will:
1
2 Select the use case that best fits needs.
Scan the configuration code(s) to set up the CR1200 or CR2500 for the selected use case. Follow
additional steps, where applicable, to program the CodeXML® Bluetooth® Modem.
(Optional) Scan User Feedback Setting codes.
Note: CR2500 reader firmware version 4512 (with boot version 3652) and CodeXML® Bluetooth® Modem processor firmware
of 0170 (with USB firmware of 0016) or higher is required to configure your CR2500. Refer to Appendix A for firmware version
verification instructions. If the firmware version displayed is below the required version or not displayed at all, please contact
Code Corporation at (801) 495-2200 or visit our website (http://www.codecorp.com/downloads.php) for upgrade instructions.
3