Code CR900FD - Manual (Page 10)

10
D020215_02_CR900FD_User_Manual
16.0 - CR900FD Maintenance
The CR900FD device needs only a minimum of maintenance to operate. A few tips are given below for maintenance suggestions.
Cleaning the CR900FD Window
CR900FD window should be clean to allow the best performance of the device. The window is the clear plastic piece inside the head of
the reader. Do not touch the window. Your CR900FD uses CMOS technology that is much like a digital camera. A dirty window may stop
the CR900FD from reading barcodes.
If the window becomes dirty, clean it with a soft, non-abrasive cloth or a facial tissue (no lotions or additives) that has been moistened
with water. A mild detergent may be used to clean the window, but the window should be wiped with a water moistened cloth or tissue
after using the detergent.
Technical Support and Returns
For returns or technical support visit www.codecorp.com/codesupport.php.