Codan Radio MT-4E Analog and P25 Digital - User Guide - Manual (Page 55)

MT-4E ANALOG & P25 DIGITAL RADIO SYSTEMS | USER GUIDE
Chapter 6: Radio System Components Page 47
POWER AMPLIFIERS
Table 6-3 shows the RF Power outputs for the transmitter modules in each frequency band.
Table 6-3: RF Power Outputs
Band Frequency Transmitter
VHF Highband 136 - 174 MHz 0.5 to 8.0 Watts
UHF 400 MHz 406 - 470 MHz 0.5 to 8.0 Watts
UHF T-Band 470 - 520 MHz 0.5 to 6.0 Watts
UHF 700 / 800 MHz 768 - 869 MHz 0.5 to 3.0 Watts
UHF 900 MHz 896 - 960 MHz 0.5 to 3.0 Watts
If a higher RF power output is required, the transmitter may be used as an exciter to drive a power
amplifi er. Codan Radio Communications manufactures a 30 Watt power amplifi er for VHF highband
and UHF 400 MHz, shown in Figure 6-8, that will fi t into a standard subrack.
Figure 6-8: 30 Watt Power Amplifi er
Codan Radio Communications can also supply higher power amplifi ers (60 W, 100 W, 250 W) that are
19” rack mountable. All transmitters and power amplifi ers are rated for 100% continuous duty.
POWER AMPLIFIER
TX
G/F
VSWR
RF OUTPUT
RF INPUT
PWR CTRL
FREQUENCY (MHz)
MADE IN CANADA
MODEL # CODE