Codan Radio MT-4E Paging - Manual (Page 25)

MT-4E PAGING SYSTEMS | USER GUIDE
Chapter 3: MT-4E Paging System Components Page 17
Zetron Model 2100 / 2200 Paging Terminal
The Model 2100 / 2200 paging terminals can act as the hub of an integrated communications system
and are suitable for the larger private paging system. The terminals are incrementally expandable in
both capacity and options, so a system can start small and grow as required. The Model 2100 / 2200
paging terminal has the following features:
• Sequential or simulcast transmitter networks supported
• Remote transmitters linked by telephone, microwave or radio links
• Supports analog two-tone or fi ve / six tone format
• Supports digital formats GSC, POCSAG (512, 1200, 2400), Motorola FLEX™ (1600) and Multitone
Mark IV / V / VI /VII
• Call logging and performance statistics
• Network multiple terminals via TNPP for wide area or regional coverage
Figure 3-3: Zetron Model 2100 / 2200 Paging Terminal
Zetron Model 33 Paging Network Controller
The Model 33 is a remote transmitter controller which connects directly to paging encoders such as
the Models 15, 32 or 64. The addition of remote control allows the paging transmitter to be located
away from the paging encoder. This allows the transmitter to be located where it will provide the best
coverage. The Model 33 generates the PURC® tones to be transmitted via wireline, microwave, or
RF link equipment to transmitter controller equipment such as the Model 66 located at the paging
transmitter sites.
Figure 3-4: Zetron Model 33 Paging Network Controller