Codan Radio MT-4E Paging - Manual (Page 24)

USER GUIDE | MT-4E PAGING SYSTEMS
Chapter 3: MT-4E Paging System Components Page 16
PAGING ENCODERS / TERMINALS AND ACCESSORIES
Codan Radio Communications does not manufacture a paging encoder / terminal or accessories.
There are many companies that can supply this equipment. Codan can supply and integrate these 3rd
party items in an MT-4E paging system.
Zetron ( www.zetron.com ) has been manufacturing communications solutions for over 25 years and
supplies paging solutions for many applications, from small, private paging systems to large, public
paging networks.
Zetron Model 15 Paging Encoder
The Model 15 paging encoder is designed for simple operation. The Model 15 paging encoder supports
analog two-tone or fi ve / six tone format, GSC and POCSAG (512, 1200, 2400).
Figure 3-1: Zetron Model 15 Paging Encoder
Zetron Model 32 / 64 Paging Terminal
The Model 32 / 64 is a dial access paging terminal. The Model 32 is equipped with one incoming
telephone line, and the Model 64 can be equipped with up to three incoming telephone lines. The
Model 64 can provide transmitter steering for up to four transmitter zones.
Callers dial into the Model 32 / 64 and enter the number of the pager to be called. For numeric pagers,
the caller enters a numeric message, which is displayed on the pager. For voice (two-tone or fi ve-tone)
pagers, the caller speaks a message which is sent to the pager. The Model 32 / 64 paging terminal has
the following features:
• Supports analog two-tone or fi ve tone format
• Supports digital format GSC and POCSAG (512)
• Field programmable by DTMF telephone
Figure 3-2: Zetron Model 32 and Zetron Model 64 Paging Terminals