Cloud Electronics CXL50 - Manual (Page 3)

2 CXL-50: Installation guide
16-07-02 V2
4 The CXL-600
The CXL-600 is available to provide convenient mounting of up to six CXL-50 100V-line
transformers into a 19” rack enclosure and includes provision for neatly tying cables. The CXL-
600 is not intended to be used free standing and will not provide adequate protection in such a
situation. See right for the dimensions of the CXL-600. The CXL-600 is designed for static
applications only extra support may be required in portable equipment.
CXL-600 Dimensions
5 Technical Specifications
Maximum Input Voltage 16V rms
Input Impedance 4 Ohms (with 250 Ohm secondary load)
Output power rating 40W rms
Minimum load impedance 250 Ohms
Distortion Typically 0.03% @ 1kHz
The CXL-50 is an accessory for specific cloud products, when installed to these products the
CXL-50 will conform to the relevant European Electrical Safety and EMC Standards
CAUTION - Installation
THE CXL-50 SHOULD BE MOUNTED IN AN ELECTRICALLY SAFE ENCLOSURE THAT
MEETS THE REQUIREMENTS OF BS EN 60065.
THE INSTALLATION OF THE CXL-50 IS BEYOND THE CONTROL OF CLOUD
ELECTRONICS Ltd AND WE ACCEPT NO RESPONSIBILITY FOR HAZARDOUS
INSTALLATIONS.
In the interest of continuing improvements Cloud Electronics Limited reserves the right to alter
specifications without prior notice.
Cloud Electronics Limited 140 Staniforth Road Sheffield S9 3HF England
Telephone +44 (0) 114 244 7051 Fax +44 (0) 114 242 5462 E-mail: [email protected]