Cloud Electronics CXM2 - Manual (Page 13)

CXM User manual 12
30-08-02 V4.0
This CXM Modular Mixer conforms to the following European EMC Standards:
BS EN 55103-1:1997
BS EN 55103-2:1997
This product has been tested for normal use in the commercial and light industrial environment. If the
equipment is used in controlled EMC environments, the urban outdoors, heavy industrial environments
or close to railways, transmitters, overhead power lines etc. the performance of the unit may be
degraded.
The CXM conforms to the following European electrical safety standard.
BS EN 60065:1998
Safety Considerations and Information
This unit must be earthed. Ensure that the mains power supply provides an effective earth
connection using a 3-wire termination.
When the mains switch is in the off ‘O’ position some components remain connected to the
Mains
CAUTION – Installation
Do not expose the unit to water or moisture
Do not expose the unit to naked flames.
Do not block or restrict any air vent
Do not operate the unit in ambient temperatures above 35 o C
CAUTION - Mains Fuse
To reduce the risk of fire, replace the mains fuse only with the same type and rating.
The fuse body size is 20mm x 5mm.
CAUTION – Servicing
The CXM contains no user serviceable parts. Refer servicing to qualified service personnel. Do
not perform servicing unless you are qualified to do so.
Disconnect the power cable from the unit before removing the top or bottom panel
Only reassemble the unit using bolts/screws identical to the original parts
In the interest of continuing improvements Cloud Electronics Limited reserves the right to alter
specifications without prior notice.
Cloud Electronics Limited 140 Staniforth Road Sheffield S9 3HF England
Telephone +44 (0) 114 244 7051 Fax +44 (0) 114 242 5462 E-mail: [email protected]